Canon imagerunner advance 8205 Operation Manual Download Page 172

Page: 172 / 264

172

Open the guide (M-A2).

Turn the dial (M-A3), and remove any jammed paper.

1. Turn the dial (M-A3) in

the direction of the arrow
(counterclockwise).

2. Remove any jammed

paper.

Remove any paper jammed in the left guide (M-B2).

1. Pull out the paper folding

unit (M-B1).

2. Open the left guide (M-B2).
3. Remove any jammed

paper in the inside guide.

4. Remove any jammed

paper in the outside guide.

5. Close the left guide (M-B2).

When closing the guide, be careful not to get your fi ngers caught, as this may result in personal
injury.

Summary of Contents for imagerunner advance 8205









































































































































































































































































Search results

Summary of Contents for imagerunner advance 8205

Reviews:

Brands by name

Popular brands

Canon imagerunner advance 8205, Operation Manual

Search results

Summary of Contents for imagerunner advance 8205

Reviews:

Brands by name

Popular brands