Canon imagePASS-P1, Service Manual, Page: 68 / 70

15
Exit from Service Mode.
Settings After Installation
1. Select [Fiery] from the main menu on the host
machine's LCD.
2. Select [Login] to log in as a system administrator.
Input of password :
A password input screen is displayed at the time of
installation.
Entering "Fiery.1" in the password field displays the
setting screen.
CAUTION:
Use single-byte upper case to enter F of "Fiery.1". Use
single-byte lower case to enter other characters.
3. Select [Tools] > [Setup].
4. Check the settings of server, network, printer and
PDL, and press [Save Changes] even if there is no
change. At that time, the setting will not be
completed unless [Save Changes] is pressed.
Example : Select [Server] > [General].
Check that the items in the General Setup are set, and
perform [Save Changes] even if there is no change. The
setting will not be completed unless [Save Changes] is
pressed.
7. INSTALLATION PROCEDURE
63