Canon imagePASS-P1, Service Manual, Page: 17 / 70

1
3
4
5
6
7
8
9
10
2
Figure 5: imagePASS connector panel
No. Item No. Item
1 DVI port (not used) 6 Monitor port (not used)
2 Type A USB2.0 ports (x4) 7 Network port (Upper RJ-45)
3 Type A USB3.0 ports (x2) 8 Crossover Ethernet connector
4 Printer interface connector 9 Duct
5 Power connector 10 Power switch
During startup, the imagePASS advances through a standard diagnostic sequence. Each diagnostic code flashes rapidly on the
LED display during this sequence, until the imagePASS reaches Idle. At Idle, the LED display shows the 00 code.
NOTE:
The LED display is mounted in upside-down orientation.
3. REPLACING PARTS
12