manualshive.com logo in svg

Canon imagePASS-P1, Service Manual, Page: 44 / 70

Share
Download
Canon imagePASS-P1 Service Manual Download Page 44

3. Depending on the file format of the system software provided, do one of the followings:

• If the system and user software are provided as ISO image files, drag and drop the ISO image files onto the Fiery USB

Setup Tool window.

• If the system and user software are provided as DVD media, insert the System Software DVD into the DVD drive, drag

and drop the DVD drive (for example, d:) onto the Fiery USB Setup Tool window.

• When prompted to insert another media into the DVD drive, remove the System Software DVD and insert the User

Software DVD in the media drive. Drag and drop the DVD drive icon onto the Fiery USB Setup Tool window.

• Once you have copied the contents, remove the DVD from the media drive.

4. Select the drive letter for the USB flash drive, and click Next.
5. When a message appears indicating that the USB flash drive is prepared, click Close to exit the Fiery USB Setup Tool.
6. Remove the USB flash drive from the computer.

IMPORTANT:

Do not leave the prepared USB flash drive attached to the computer. If the drive is still attached when the computer
starts up or reboots, system corruption may result.

7. Label the prepared USB flash drive with identifying information.

For example, copy onto a label tag (1) the product name, and (2) the system software version number that you find printed
on the System Software DVD label. The USB flash drive is now prepared and can be used to install system software.

To install system software using a prepared USB flash drive

1. Remove all USB devices that may be connected to the imagePASS.
2. If possible, print the Configuration pages (see

“Printing the Configuration pages” on page 41

).

The Configuration pages contain a list of any installed options and a record of the customer’s current Setup configuration.

3. If you are reinstalling the same version of system software, back up the current system configuration (see(

“Backing up and

restoring the system configuration” on page 36

).

4. Power off the printer using the main power switch.

The imagePASS will be automatically shut down.

5. Move the imagePASS power switch to the OFF (O) position.
6. Disconnect all external cables from the imagePASS, except the power cable and the printer interface cable.

NOTE:

Be sure to leave the power cable connected between the imagePASS and the power outlet.

4. INSTALLING SYSTEM SOFTWARE

39

Summary of Contents for imagePASS-P1







































































Reviews:

No comments