Canon FAXPHONE B150 User Manual Download

Page: 5 / 138

For your safety (Australia only)

To ensure safe operation the three-pin plug supplied must be inserted only into a standard three-pin

power point which is effectively earthed through the normal household wiring.

Extension cords used with the equipment must be three-core and be correctly wired to provide

connection to earth.

Wrongly wired extension cords are a major cause of fatalities. The power point shall be located near the

equipment and shall be easily accessible.

The fact that the equipment operates satisfactorily does not imply that the power point is earthed and

the installation is completely safe. For your safety, if in any doubt about the effective earthing of the

power point, consult a qualified electrician.

Caution (New Zealand only)

1. This equipment may not necessarily provide for the effective hand-over of a call to or from a

telephone connected to the same line.

2. The Operation of this equipment on the same line as telephone or other equipment with audible

warning devices or automatic ring detectors will give rise to bell rinkle or noise and may cause false

tripping of the ring detector. Should such problems occur, the user is not to contact telecom faults

service.

3. Should this equipment become physically damaged, disconnect immediately from the Telecom

connection and power source and contact your nearest service agent.

4. To relocate this equipment please.

1) Disconnect the equipment from the Telecom connection.

2) Disconnect the equipment from the power source.

3) Reconnect the equipment to the power source.

4) Reconnect the equipment to the Telecom connection.

5. If the supply cord of this equipment is damaged, it must be replaced by the special cord (Parts

No.:HH2-1910).

6. Not all standard telephones will respond to incoming ringing when connected to the extension

socket.

Summary of Contents for FAXPHONE B150











































































































































Search results

Summary of Contents for FAXPHONE B150

Reviews:

Related manuals for FAXPHONE B150

Brands by name

Popular brands

Canon FAXPHONE B150, User Manual

Search results

Summary of Contents for FAXPHONE B150

Reviews:

Related manuals for FAXPHONE B150

Brands by name

Popular brands