Canon FAXPHONE B150 User Manual Download

Page: 125 / 138

In case of a power failure

The user data settings and registered data for One-touch Speed Dialling and Coded Speed Dialling are

saved during a power failure using a built-in battery. However, documents stored in the fax memory will

be deleted. If a power failure occurs or the power is turned off, the fax will automatically print a

Memory Clear List as soon as the power is turned on or the power is restored. This list informs you of

the deleted memory files.

During a power failure

The following restrictions apply to the function of the fax during a power failure or while the power is

turned off:

A call can be received with the fax during a power failure. However, a call cannot be made since the

numeric buttons, One-touch Speed Dialling and Coded Speed Dialling features are not operational.

A document can neither be sent nor received during a power failure.

113

Summary of Contents for FAXPHONE B150











































































































































Search results

Summary of Contents for FAXPHONE B150

Reviews:

Related manuals for FAXPHONE B150

Brands by name

Popular brands

Canon FAXPHONE B150, User Manual

Search results

Summary of Contents for FAXPHONE B150

Reviews:

Related manuals for FAXPHONE B150

Brands by name

Popular brands