Canon FAXPHONE B150 Page 121 User Manual Download

Page: 121 / 138

Print quality problems

If the printout is unsatisfactory, consider the following suggestions:

Most paper has a right side and a wrong side. If the print quality is poor, try turning the paper over

and printing on the other side.

If characters and images are blurred, check that you are using the correct kind of paper, see p. 7.

If ink gets on the printer’s platen, the reverse side of the printed page will have smudges. In this case,

clean the platen area with a soft dry cloth. See p. 101.

If white streaks or missing dots appear on printed pages, perform the print head cleaning operation.

See p. 102.

If the quality is not crisp and clear after cleaning the print head, repeat the head cleaning procedure

again. If output is still not satisfactory after cleaning the print head five consecutive times, replace the

BJ cartridge. See p. 103.

If the following print quality problems occur in the entire printing area, check for the most probable

cause and remedy as listed below.

Print Results

Most Probable Cause

Remedy

Smudged

Paper type

Try a different type. See p. 7.

Blurred

Paper type

Try a different type. See p. 7.

Faded

Print head is clogged or out of ink.

Perform head cleaning or replace the

BJ cartridge. See pp. 102, 103.

White Streaks

Print head is clogged.

Perform head cleaning or reinstall the

BJ cartridge. See pp. 11, 102.

Dots Missing

Print head is clogged.

Perform head cleaning. See p. 102.

Irregular Dots

Print head is clogged.

Perform head cleaning. See p. 102.

109

Summary of Contents for FAXPHONE B150











































































































































Search results

Summary of Contents for FAXPHONE B150

Reviews:

Related manuals for FAXPHONE B150

Brands by name

Popular brands

Canon FAXPHONE B150, User Manual

Search results

Summary of Contents for FAXPHONE B150

Reviews:

Related manuals for FAXPHONE B150

Brands by name

Popular brands