Canon FAXPHONE B150 User Manual Download

Page: 30 / 138

Fax Only Mode

The fax is set up at the factory to Fax/Tel Mode. If you have a dedicated fax line, you need to set the

mode to Fax Only.

Setting Fax Only Mode

When you set the fax to Fax Only Mode, the unit picks up every call and automatically treats it as a fax

transmission.

The fax cannot receive automatically if you are making copies, printing reports, or registering

information. See p. 72.

Press [RECEIVE MODE] until

″

Fax Only Mode

″

appears on the LCD.

Press [START/COPY].

When this mode is set, the LCD will display the

time and

″

FaxOnly

″

Receiving documents in Fax Only Mode

When the fax is set to Fax Only Mode, it automatically receives documents whenever a call comes over

the fax line.

Make sure the fax is set to

″

Fax Only Mode

″

(see above).

The fax assumes all incoming calls are from another fax machine sending a document. It receives the

documents automatically.

Fax Only Mode

RECEIVE MODE

12:00

FaxOnly

START/COPY

SETTING UP

Summary of Contents for FAXPHONE B150











































































































































Search results

Summary of Contents for FAXPHONE B150

Reviews:

Related manuals for FAXPHONE B150

Brands by name

Popular brands

Canon FAXPHONE B150, User Manual

Search results

Summary of Contents for FAXPHONE B150

Reviews:

Related manuals for FAXPHONE B150

Brands by name

Popular brands