Canon FAXPHONE B150 User Manual Download

Page: 2 / 138

How to use this User’s Guide

Before you use this user’s guide, read this list of symbols, terms and abbreviations to become familiar

with them. A complete glossary of terms is included at the end of this guide.

Document

The original sheet(s) of paper you send, receive or copy with your fax.

Menu

A list of options or features from which you select an item to set up or change.

Numeric buttons

The round buttons on the operation panel with digits 0 through 9,

and # on them.

Arrow buttons

The buttons

used to display choices and change settings. These buttons also change the

volume setting of the speaker.

STOP button

Press

to cancel any operation or to cancel the selection of a menu item.

START/COPY button

Press

) to start an operation or register a setting.

Transaction number

A number automatically assigned everytime you send or receive a fax. Transaction numbers are

4-digit numbers that can help you keep track of the documents you send and receive.

TX/RX NO. XXXX

Represents the transaction number when displayed on the LCD, where XXXX is the 4-digit

transaction number.

Stands for transmit or send.

Stands for receive.

NOTE

A note describes important points and helpful hints, or how to avoid minor difficulties.

As an ENERGY STAR Partner, Canon has determined that the FAX-B150
meets the ENERGY STAR guidelines for energy efficiency.

Trademarks

Canon and BJ are registered trademarks, and Bubble Jet is a trademark of

Canon Inc.

Copyright

transmitted, transcribed, stored in a retrieval system, or translated into any language or computer

language in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or

otherwise, without the prior written permission of Canon Inc.

This CE Marking shows compliance of this equipment with Directive 73/23/EEC and Directive

89/336/EEC (as amended by Directive 92/31/EEC), both as amended by Directive 93/68/EEC.

Canon Inc./Canon Europa N.V.

Summary of Contents for FAXPHONE B150











































































































































Search results

Summary of Contents for FAXPHONE B150

Reviews:

Related manuals for FAXPHONE B150

Brands by name

Popular brands

Canon FAXPHONE B150, User Manual

Search results

Summary of Contents for FAXPHONE B150

Reviews:

Related manuals for FAXPHONE B150

Brands by name

Popular brands