Canon FAXPHONE B150 User Manual Download

Page: 21 / 138

Installing the BJ cartridge

The first time you set up your fax, you have to install the BX-3 BJ FAX cartridge before you can begin

receiving and copying documents.

BJ cartridge guidelines

Use only the Canon BX-3 BJ FAX cartridge with the FAX-B150.

The actual amount of ink that you use will vary depending on the print density of a page. If the

majority of your printed output is graphics, you may need to change the ink cartridge more often than

when you are receiving or copying text only.

You may need to replace the BJ cartridge when either of the following conditions exist:

Your printed output is not crisp and clear, and there are gaps in the characters (missing dots) even

after you have cleaned the print head once or twice and you have removed and reinstalled the BJ

cartridge.

You have been using the BJ cartridge for over one year.

Note

To ensure optimum print quality, Canon recommends the use of the cartridges designated by

Canon. Canon accepts no liability or responsibility for damages caused by the use of any

cartridge other than those designated by Canon.

Canon makes numerous ink cartridges; the BX-3 BJ FAX cartridge is the only one designed to be

used with the FAX-B150.

Summary of Contents for FAXPHONE B150











































































































































Search results

Summary of Contents for FAXPHONE B150

Reviews:

Related manuals for FAXPHONE B150

Brands by name

Popular brands

Canon FAXPHONE B150, User Manual

Search results

Summary of Contents for FAXPHONE B150

Reviews:

Related manuals for FAXPHONE B150

Brands by name

Popular brands