Canon FAXPHONE B150 User Manual Download

Page: 41 / 138

After selecting or entering a value, press
[START/COPY].

Repeat steps 4 and 5 as needed.

When the operation is complete, press [STOP].

Registration ends and the fax returns to standby

mode.

Note

After 60 seconds of no operation panel input, the fax returns to standby mode and any unregistered

changes are lost.

Entering a number

Whenever you are prompted to enter a fax number or a telephone number, follow these procedures.

Use the numeric buttons to enter the number.

You can enter up to 20 digits for your fax number or 50 digits for a speed dialling number.

Be sure to enter 1 and the area code, if necessary, to dial a different area code.

Do not enter dashes, slashes, commas, or other punctuation.

Use the One-touch Speed Dialling buttons as follows:

To enter a space between numbers, press [SPACE].

If you make a mistake, press [CLEAR] and enter the number

again.

To erase a previously registered number, press [CLEAR].

You can also enter a new number over the old one.

If you need to enter a pause for any reason,

Press [REDIAL/PAUSE] at the desired point in the sequence when entering a series of digits.

A pause within a number is 2 seconds long*. The length of this pause can be adjusted. See MID

PAUSE SET in TX SETTINGS, p. 85. A pause at the end of a number is fixed at 10 seconds.

* 4 seconds long in the UK.

DATA ENTRY OK

START/COPY

STOP

TEL=

SEND OPTIONS

REPORT

CLEANING

SPACE

CLEAR

TONE

D.T.

REGISTERING YOUR NAME AND NUMBER

Summary of Contents for FAXPHONE B150











































































































































Search results

Summary of Contents for FAXPHONE B150

Reviews:

Related manuals for FAXPHONE B150

Brands by name

Popular brands

Canon FAXPHONE B150, User Manual

Search results

Summary of Contents for FAXPHONE B150

Reviews:

Related manuals for FAXPHONE B150

Brands by name

Popular brands