Canon FAXPHONE B150 User Manual Download

Page: 24 / 138

Insert the BJ cartridge. Align the slot in
the cartridge with the yellow post in the
fax.

The yellow post (BJ cartridge guide) should be

visible through the slot. The BJ cartridge tilts

slightly to the left in the loaded position.

Lower the cartridge release lever down
until you hear a click to lock the
cartridge in place.

Make sure the arm on the cartridge release

lever aligns with the marking on the BJ

cartridge.

If the lever movement is not smooth, release

the lever and reload it.

To avoid cartridge misalignment and an error

message appearing, do not press down on the

cartridge or try to align it manually while

raising and lowering the green lever.

Close the front cover of the fax.

SETTING UP

Summary of Contents for FAXPHONE B150











































































































































Search results

Summary of Contents for FAXPHONE B150

Reviews:

Related manuals for FAXPHONE B150

Brands by name

Popular brands

Canon FAXPHONE B150, User Manual

Search results

Summary of Contents for FAXPHONE B150

Reviews:

Related manuals for FAXPHONE B150

Brands by name

Popular brands