www.flash-butrym.pl
FOG MACHINE FLZ
User Manual
FOG MACHINE FLZ-2000
Page 1
2000
Page 1: ...www flash butrym pl FOG MACHINE FLZ User Manual FOG MACHINE FLZ 2000 User Manual Page 1 2000 ...
Page 2: ... cables Handle the power cord and all connections with the mains with particular caution Make sure that the available voltage is not higher than stated on the rear panel Make sure that the power cord is never crimped or damaged by sharp edges Check the device and the power cord from time to time CAUTION Before filling the machine disconnect from mains Never drink fluid or use it on the inside or o...
Page 3: ...into a 3 pin XLR plug and plug it in the DMX output of the last fixture Connection with the mains Connect the device to the mains with the enclosed power supply cable Addressing After you connect the fogger to the mains the dip switch on the rear allows you to assign the DMX fixture address which the item will respond to the controller If you set for example the address to channel 7 the item will ...
Page 4: ...Before replacing the fuse unplug mains lead Procedure Step 1 Open the fuse holder on the rear panel with a fitting screwdriver Step 2 Remove the old fuse from the fuse holder Step 3 Install the new fuse in the fuse holder Step 4 Replace the fuse holder in the housing Should you need any spare parts please use genuine parts If the power supply cable of this device will be damaged it has to be repla...
