manualshive.com logo in svg

Canon CXDI-60G, Service Manual

Share
Download
Canon CXDI-60G Service Manual Download Page 179

6. Troubleshooting 

 

15

 
6.2.3  When the hard drive crashes 

Recover the system using the following method when the hard drive crashes. 

1)  Replace the crashed hard drive with the hard drive provided in item B above, “Backup 

method using a hard drive”. 

* Copy \Ccr from the original hard drive to the new hard drive when the D drive in the 
crashed hard drive is in a normal state (a problem case caused by the OS). 

Note: Perform Step 2 after upgrading if the CXDI software version you are using is newer 
than that in the hard drive provided by copying from hard drive to hard drive during system 
installation. 

(Files such as StrTable.ini are not compatible when the CXDI software version is different.) 

* When the hard drive has crashed mechanically, proceed to Step 2 and subsequent steps. 

2)  After replacement, copy to overwrite all the ini files stored on the floppy disk to d:¥ccr in 

order to recover the user’s environment. 

Note that images captured by users cannot be inherited in this case. 

Note: Calibration is required when the system has been used for over one year. 

Note: Perform Step 2 after upgrade if the CXDI software version you are using is newer than 
that in the hard drive provided by copying from hard drive to hard drive during system 
installation. 

(Files such as StrTable.ini are not compatible when the CXDI software version is different.) 

 

6.2.4  When problems occur in driver software 

When drivers such as the touch panel driver are damaged, reinstall the appropriate drivers by 
referring to “C3S Service Manual”. 

Summary of Contents for CXDI-60G



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands