Canon CXDI-60G, Service Manual

Page: 112 / 186

2. Installation
96
7.8 Post-installation Checks
Check sheet
Checkpoint Checkpoint details Check
Align the unit with the X-ray tube †
Checking the imaging unit
Check that the unit does not interfere with the
cables.
†
Set the date. †
Set the time. †
Checking the date and time
Set the time zone. †
Checking the software version
Check that the CXDI software, firmware and PLD
code versions all match.
†
Identifying and registering the
imaging units
Register the serial numbers of the sensors †
Inputting the control computer
serial number Input the serial number of the control computer to
be used.
†
Set the contrast. †
Set the brightness. †
Checking the operation unit
Set the gamma correction. †
kV †
mA †
Checking the exposure
condition table
msec or mAs †
Checking the annotation
Check that the setting have been made in
accordance with the customer’s request.
†
IP address †
Subnet mask
† Network connections
Default gateway †
Perform calibration. †
Preparations prior to exposure
Perform self-test.
†
Checking image transfer to
printers and storages Check that the setting have been made in
accordance with the customer’s request.
†
Checking image transfer to
external memory device
Check that the image is transferred properly. †
Checking the image quality
Use SMPTE pattern to check the density on a linear
chart.
Check that there is no artifacts, shading, etc.
†
dtque †
dtstore †
dttmp †
old
†
Deleting unnecessary data
(there must be no unnecessary
data such as the images used
for testing)
Windows XP trash box †
Operate from the Windows XP desktop. †
Checking the window displays
(no unnecessary windows must
appear; the same applies after
rebooting)
Taskbar
†