manualshive.com logo in svg

Canon CX-G2400, User Manual

Share
Download
Canon CX-G2400 User Manual Download Page 98

93

Checking the Printer Status

NOTE

•  The status monitor allows you to check the current status of the printer, print status, ink information, and 

maintenance cartridge information.

• Cancelling Printing

To cancel printing, click [Cancel Print Job] on the status monitor. 
All print data in process in the computer, current print jobs and print jobs that are received/processed are 
canceled.

•  Viewing the  Status Information

The Status Information indicates the status of the printer by displaying the following four icons and messages.

Information

Warning message

 (P.165)

Operator Call Error message

 (P.166)

Service Call Error message

 (P.171)

How to Start and Display the Status Monitor

1 

Open the Start menu and select the desired start option.

1.  Select one of the followings.

[Start During Printing]

The Status Monitor automatically starts when a 
print job starts. (This is the default setting.)

[Start With Windows]

The Status Monitor starts when Windows starts.

A dot symbol (   ) marks the currently selected 
item.

Summary of Contents for CX-G2400



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands