manualshive.com logo in svg

Canon CX-G2400, User Manual

Share
Download
Canon CX-G2400 User Manual Download Page 182

177

Moving the Printer

damaged or could result in a printer failure.

•  For how to install the printer after movement, refer to the “Getting Started Guide.”

1 

Open the properties window of the printer.

 (P.32)

2 

Execute [ Moving The Printer].

Remove ink from the ink receiver so that ink does not leak during movement.

2

1

1.  Click the [Utility] tab.

2.  Click [Moving The Printer].

 

A confirmation message will appear.

3

3. Click [Yes].

 

Ink bleeding starts.
Do not operate the printer until after the 
message indicating that the removal of ink is 
completed appears.

IMPORTANT

•  During execution of [Moving The Printer], review the following precautions;

 

-

 Do not turn off the printer.

 

-

Do not open/close the ink tank cover and transport unit lever.

 

-

Do not operate any other component of the printer.

Summary of Contents for CX-G2400



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands