manualshive.com logo in svg

Canon CX-G2400, User Manual

Share
Download
Canon CX-G2400 User Manual Download Page 185

180

Chapter 5  Appendix

•  Do not move the printer with the ink tank cover open or with the transport unit drawn out. They could be 

damaged or a printer failure could result.

•  For how to install the printer after movement, refer to the “Getting Started Guide.”

1 

Open the properties window of the printer.

 (P.32)

2 

Execute [Shipping The Printer].

Remove ink from the ink flow passage so that ink does not leak during transportation.

2

1

1.  Click the [Utility] tab.

2.  Click [ Shipping The Printer].

 

A confirmation message will appear.

3

3. Click [Yes].

 

Execute [Shipping The Printer].
Do not operate the printer before the specified 

message appears in step

3

. 

IMPORTANT

•  During execution of [Shipping The Printer], review the following precautions;

 

-

Do not turn the printer off.

Summary of Contents for CX-G2400



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands