manualshive.com logo in svg

Canon CX-G2400, User Manual

Share
Download
Canon CX-G2400 User Manual Download Page 127

122

Chapter 3  Maintenance

4

4.  Click the button (Y) and then specify the 

horizontal adjustment value.

5

5.  Adjust the print head position for yellow. 

(Adjustment pattern [Y])
Read the vertical and horizontal 
adjustment values in the same manner 
as cyan and then click radio buttons (D) 
and (Z) one after another to specify the 
vertical and horizontal adjustment values.

NOTE

•  To specify the adjustment value, move the slider or enter a value directly in the entry box interlocked with the 

slider.

•  The vertical adjustment range is from -32 to +32, and the horizontal adjustment range is from -25 to +25. 

However, the adjustment range may be limited depending on the current settings. Specify the adjustment value 
between   and   shown on the slider scale.

•  To retry from [Step 3] (adjustment of the print head position for black), click [Return to Step 3].

Summary of Contents for CX-G2400



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands