53
Setting Micro Margin Printing
7
Adjust the trimming position.
1
2
1. Enter the trimming position.
The current trimming position is 0.0 mm.
Each of the four sides can be adjusted in the
range of -0.3 mm to +0.3 mm in 0.1 mm steps.
However, the adjustment range may be limited
depending on the current setting.
The more negative the value, the more the
outward shift. The more positive the value, the
more the inward shift.
The more negative the value, the more the
outward shift. The more positive the value, the
more the inward shift.
2. Click [Send].
3
3. Click [Yes].
8
Print adjustment patterns again.
1
1. Click [Print Check Pattern].
A confirmation message appears.
