Canon CR-X300 User Manual Download Page 32

Page: 32 / 114



Video display/operation area

Displays the video received from the camera. Also, operates the pan, tilt, and zoom of the camera.

(5)

Video Display Area

JPEG video is displayed.

When the image cannot be displayed, the

Reconnect button appears in the center of the screen.

(6)

Pan

lider (P. 33)

Move the camera angle left or right. Use the

button to fine-tune the position.

(7)

Tilt

lider (P. 33)

Move the camera angle up or down. Use the

button to fine-tune the position.

(8)

Zoom

lider (P. 33)

Move up to zoom in (telephoto) or down to zoom out (wide angle).

Use the T or W button to fine-tune the position.



Settings area

Change camera settings. Click each tab to switch the settings area.

(9)

[Exposure] tab (P. 35)

Sets exposure settings.

(10)

[WB/Color] tab (P. 40)

Setting the white balance and color matrix settings.

(11)

[Image Quality] tab (P. 42)

Setting the image quality.

(12)

[Image Quality Details] tab (P. 43)

Sets advanced image quality settings.

(13)

[Focus] (P. 45)

Sets focus settings.

(14)

[PTZ/I

] tab (P. 48)

Sets pan, tilt, and zoom operations and image stabilizer settings.

(15)

[Preset] tab (P. 49)

Sets the preset settings.

(16)

[Other Functions] tab (P. 51)

Sets various settings related to the camera control such as color bar or external device output.

(17)

[

ystem] tab (P. 52)

Configure advanced camera system settings such as video and audio, server, communications, and security.

If this tab is clicked, the video display/operation area disappears, and the screen will be configured with the

setting item category and the settings screen.

Note

• By clicking

at the right of the tab area, the Settings area will be hidden, and only the video display/operation area will be

displayed.
It will be reverted by clicking

• If the width of the screen is narrow, tabs can be switched by using the

buttons. Also, for each Settings area, it is possible to

switch the display by using the

buttons at the bottom of the screen or by clicking

Important

Do not use the [Back] and [Forward] buttons on the Web browser to navigate through the settings page. The changed settings
may be reverted or unintended changes may be applied.

Summary of Contents for CR-X300



















































































































Search results

Summary of Contents for CR-X300

Reviews:

Related manuals for CR-X300

Brands by name

Popular brands

Canon CR-X300, User Manual

Search results

Summary of Contents for CR-X300

Reviews:

Related manuals for CR-X300

Brands by name

Popular brands