58
Bit rate settings for the audio input from the built-in microphone and for IP audio streaming.
General audio
Settings for the volume of the audio input and the audio input operation with the built-in microphone.
[Audio Input]
Select whether to use audio from the built-in microphone.
When [Disable] is selected, audio will not be outputted from HDMI/SDI output.
Note
To set [Audio Input] to [Disable], all of the following settings must be changed to [Disable].
– [System] > [Server] > [RTP Server] > Each stream (Main, Sub1, Sub2) > [Audio Transmission]
– [System] > [Communication] > [External Connection (IP)] > [NDI|HX] > [Audio Transmission]
– [System] > [Communication] > [External Connection (IP)] > [RTMP] > [Audio Stream]
[Input Volume]
Settings for the input volume from the built-in microphone.
[Current Volume Level (L)], [Current Volume Level (R)]
Displays the current volume level in the status bar.
[Attenuator]
Select whether to use the attenuator.
IP Audio Streaming
Features settings for IP Audio streaming.
[Distribution Bit Rate (kbps)]
Select the bit rate for distribution.
[System] > [Video and Audio] > [Audio]
Important
• Video and audio may not sync.
• Depending on the performance of the computer and the network environment, audio may be interrupted.
• If using antivirus software, audio may be interrupted.
• If communication is temporarily interrupted by reseating of the LAN cable for example, the audio will be disconnected. In this case,
reconnect the device to the camera.
