Canon CR-X300 User Manual Download Page 30

Page: 30 / 114

Follow the steps below to connect to cameras to display the Settings Page.

Accessing from a Web Browser

Enter the IP address set in "Initial Camera Settings" (P. 26) directly into the web browser to display the Camera's Settings

Page.

The Settings Page can only be connected with an Administrator Account.

The authentication screen of the Settings Page is displayed.

The Settings Page is displayed.

Overview

Important

• In the case the Administrator Account is forgotten, return settings to factory default settings (P. 96). However, because the

Administrator Account and other settings will be initialized, it will no longer be able to connect to the camera as it is. Use the Camera
Search Tool to configure the default settings.

• Do not open multiple Settings Pages at one time and try to change the settings of a single camera.

Launch the web browser.

Enter the IP address and press Enter.

Enter Administrator Name and Administrator Password, then click [

ign in].

Summary of Contents for CR-X300



















































































































Search results

Summary of Contents for CR-X300

Reviews:

Related manuals for CR-X300

Brands by name

Popular brands

Canon CR-X300, User Manual

Search results

Summary of Contents for CR-X300

Reviews:

Related manuals for CR-X300

Brands by name

Popular brands