Canon CR-X300 User Manual Download Page 42

Page: 42 / 114

Setting the image quality.

Note

In the following cases, the [Image Quality] tab cannot be selected.

– When [Exposure] > [Shooting Mode] is

(Portrait),

(Sports),

(Low Light), or

(Spotlight)

– When [Exposure] > [Infrared] is set to [On]

[Gamma]

Select the gamma curve that determines the overall taste of the video.

[Normal 1 (

tandard)]

Use when watching on a TV monitor.

[Normal 3 (BT.709)]

Able to express black gradation in the shadow areas more compared to Normal 1.

[Color

pace]

Select a color space.

[BT.2020 Gamut]

A color space that conforms to the ITU-R BT. 2020 standard specified for UHDTV (4K/8K).

This is the setting for HDMI/SDI output.

[BT.709 Gamut]

A standard color space that conforms to the sRGB standard.

[Color Matrix]

Select a color tone for the video.

[Video]

Realizes color reproduction with contrast suitable for TV broadcasting.

[Neutral]

Faithful color reproduction.

Image Quality Settings

Normal 1

Normal 3
Normal 1

Normal 3

Input

Output

Summary of Contents for CR-X300



















































































































Search results

Summary of Contents for CR-X300

Reviews:

Related manuals for CR-X300

Brands by name

Popular brands

Canon CR-X300, User Manual

Search results

Summary of Contents for CR-X300

Reviews:

Related manuals for CR-X300

Brands by name

Popular brands