Canon C3220, Copying Manual, Page: 286 / 372

Area Designation
6-40
6
Special Cop
ying F
eatures - Image Editing
NOTE
•
If you make a mistake when entering values, press [C] on the inch entry pop-up
screen
➞
enter the correct values.
•
To enter values in millimeters, press [mm].
•
When entering values in millimeters, you can also use - (numeric keys), and
(Clear) to clear your entries.
•
For instructions on entering values in inches, see Chapter 2, "Basic Operations," in
the
Reference Guide .
•
To change a value you entered, press [X1], [X2], [Y1], or [Y2]
➞
enter the correct
value using the numeric keys on the inch entry pop-up screen.
•
To check the designated area, press [Check Area].
5
Press [Blanking].