Canon C3220, Copying Manual, Page: 121 / 372

Changing the Copy (Zoom) Ratio
2-37
2
Basic Cop
ying F
eatures
Entire Image
If you are copying an original with an image that extends all the way to the edges
onto the same size paper at a copy ratio of 100%, the periphery of the original
image may be cut off slightly on the copy. However, if you set the Entire Image
mode, the image is slightly reduced so that the entire image is copied without being
cut off.
The Entire Image mode should also be set when you want to copy 11" x 17"
originals onto paper larger than 11" x 17" to ensure that the edges of the originals
are not cut off. Make sure to place the originals on the platen glass, and load the
stack bypass with 12 5/8" x 17 11/16" or 12" x 18" paper, or load a paper drawer
with 12" x 18" paper. (See "Platen Glass," on p. 1-23, and "Paper Selection," on p.
2-6.)
IMPORTANT
The Entire Image mode cannot be used with the Multi-Page Enlargement, Booklet,
Frame Erase, Image Combination, Image Repeat, Mirror Image, or Tab Paper mode.
NOTE
The reduction ratios when the Entire Image mode is specified are:
1
Place your originals
➞
press [Copy Ratio].
- 11" x 17": 98.2% (12" x 18": 100%)
- LGL: 97.6%
- LTR: 98.2%
- STMT: 96.4%