Canon 1064C001 Operation Manual Download Page 129

Page: 129 / 264

128

Configuring View Restrictions

Set a restrict view area and click [Apply] to restrict the capture range of the Camera Viewer.

Note

To delete view restriction settings, select [Disable], and click [Apply].

Operate the camera angle in the video display area to get the positioning value, and specify the restrict view

area.

[Upper Limit]/[Lower Limit]/[Left Limit]/[Right Limit]

Operate the camera angle to the upper limit, lower limit, left limit, and right limit to set in the video display area.

Click [Get value] in each position to reflect the values to the pan/tilt preview frame.

Click [Preview] in [Upper Limit]/[Lower Limit]/[Left Limit]/[Right Limit] to move the preview frame to the upper

limit, lower limit, left limit, and right limit of the current pan/tilt preview frame, respectively, and display it in the

video display area.

Note

In the following cases,

(warning icon) will be displayed with a message stating that the restrict view area cannot be

configured, and you will become unable to set view restrictions.

• For [Left Limit]/[Right Limit]: If [Camera] > [Camera Control] > [Auto Flip] (P. 109) is set to [Enable]

• For [Upper Limit]: If [Camera] > [Camera Control] > [Auto Flip] (P. 109) is set to [Enable], and [Camera] > [Installation

Conditions] > [Image Flip] (P. 111) is also set to [Enable]

• For [Lower Limit]: If [Camera] > [Camera Control] > [Auto Flip] (P. 109) is set to [Enable], and [Camera] > [Installation

Conditions] > [Image Flip] (P. 111) is set to [Disable]

To set the upper limit, lower limit, left limit, and right limit, set [Camera] > [Camera] > [Camera Control] > [Auto Flip] (P. 109) to
[Disable].

[Telephoto]/[Wide-angle]

Operate the camera angle to the wide-angle/telephoto limit to set in the video display area.

Click [Get value] in each position to reflect the values to the wide-angle preview frame/telephoto preview frame.

Click [Preview] in [Telephoto]/[Wide-angle] to move the preview frame to the telephoto/wide-angle limit of the

current wide-angle preview frame/telephoto preview frame and display it in the video display area.

You can also set the telephoto/wide-angle limit range by directly moving the operation knob on the zoom slider up

and down. This also moves the preview frame to the telephoto/wide-angle limit of the current wide-angle preview

Important

• If you have changed how the camera is installed, reconfigure the view restriction settings.

• Check view restrictions again if you change the [Basic] > [Video] > [All Videos] > [Video Size Set] settings on the Setting Page.

• When [Camera] > [Camera] > [Camera Control] > [Digital Zoom] or [Image Stabilizer] are changed in the setting page, check the view

restriction settings again.

Select [Enable] in [View Restrictions].

Use the video display area to configure the view restrictions.

R12

R13

Summary of Contents for 1064C001









































































































































































































































































Search results

Summary of Contents for 1064C001

Reviews:

Related manuals for 1064C001

Brands by name

Popular brands

Canon 1064C001, Operation Manual

Search results

Summary of Contents for 1064C001

Reviews:

Related manuals for 1064C001

Brands by name

Popular brands