Canon 1064C001, Operation Manual

Page: 109 / 264

108
Settings for the camera name and external input/output devices, and for camera use and installation settings.
Camera Name
Set the camera name.
[Camera Name]
Enter any camera name. Be sure to enter a name in [Camera Name (alphanumeric characters)].
Camera Control
Set various controls for easier viewing of video.
[Digital Zoom]
Select this to enable or disable digital zoom.
If [Enable] is selected, the area indicating digital zoom will be displayed next to the zoom slider in the Viewer (P. 68).
Unlike optical zoom, the higher the digital zoom ratio, the lower the video quality.
[Enhanced Digital Zoom]
Select this to enable or disable the enhanced digital zoom.
When the video size is small, digital zoom can be used to enlarge it up to the maximum size resolution with reduced video
deterioration.
When [Enable] is selected, an area indicating the enhanced digital zoom and a horizontal line (blue) indicating the
enhanced digital zoom telephoto end are displayed on the zoom slider of the Viewer (P. 68).
[Maximum Digital Zoom Magnification]
Sets the maximum zoom magnification for digital zoom.
[Image Stabilizer]
Select this to enable or disable blur reduction in video due to camera vibration.
[Camera] > [Camera]
Setting General Camera Controls
The following settings can be configured here.
• Camera Name
• Camera Control
• Day/Night (when Auto is set)
• Installation Conditions
• Camera Position Control
• External Input Device 1, 2
• External Output Device 1, 2
R13 R12 M50
R13 R12 M50