Canon 1064C001, Operation Manual

Page: 110 / 264

Setting Page
5
109
If there is still blur after selecting [On1], select [On2].
The angle of view will be narrower and video noisier when using the Image Stabilizer, compared to when it is not used.
[Smart Shade Control Strength (Auto)]
Select the control strength when [Smart Shade Control] (P. 116) is set to [Auto].
• [Mild]: Select if noise is noticeable.
• [Medium]: Recommended setting for Auto mode (default setting).
• [Strong]: Select to increase visibility in dark areas.
[Haze Compensation Strength (Auto)]
Select the strength of compensation when [Haze Compensation] (P. 117) is set to [Auto].
Note
When [Haze Compensation] is set to [Auto] and [Haze Compensation Strength (Auto)] is set to [Strong], contrast may be strong if the
subject is not obscured by haze. If this happens, set [Haze Compensation Strength (Auto)] to [Mild].
[Infrared Light Strength (Auto)]
Select the infrared illumination strength when you have selected [Auto], [Auto (Flickerless)], [Auto (Shutter-priority AE)] or
[Auto (Aperture-priority AE)] for [Exposure] (P. 115).
Note
• If all or part of the image appears to have a white glow, there is a possibility that a wall (even a wall not in the image) is reflecting the
infrared lighting. If this occurs, please adjust the camera angle.
• When using the infrared lighting, and there is a problem in getting the desired contrast on the object (would like the image brighter or
darker), please adjust the Exposure Compensation (
P. 115
) and/or the Metering Mode (
P. 116
).
[Motion-Adaptive Noise Reduction]
When [Enable] is selected, noise reduction is automatically adjusted according to movement. For scenes in which there is
little movement, noise reduction is increased and data size decreases.
[Pan/Tilt Speed Control]
Select the pan/tilt control mode.
If [Control by zoom position] is selected, the pan/tilt speed will be slower in telephoto, and faster in wide-angle.
[Auto Flip]
Select this to enable or disable Auto Flip.
If you enable Auto Flip and tilt the camera using the video display area in the Viewer (P. 68), the video will flip when the tilt
angle of the camera nears 100°. Because this operation is effectively the same as panning 180°, at the same time that the
video flips, the position of the pan/tilt slider knob moves to the pan/tilt position after flipping.
Important
• The image stabilizer is not effective when the subject is shaking.
• Stabilization is not effective beyond a certain degree of vibration or for momentary vibrations.
• If you select [On2], It is recommended to select a video reception size less than [640 x 480].
• If you use stabilization, please refer to the information listed in the following “Important” sections.
– The “Important” section in “Setting Privacy Mask” (P. 145)
– The “Important” section in “Setting View Restriction” (P. 128).
– The “Important” section in “Viewing Video with the Camera Viewer” (P. 62).
– The “Important” section in “Registering Presets” (P. 131).
Important
The intended effect may not be achievable, depending on the size and movement speed of the subject.
R13 R12 M50
H652
R13 R12 M50
R13 R12