Canon 1064C001 Operation Manual Download Page 164

Page: 164 / 264

Setting Page

163

[Audio Playback at Inactive Event]

If you select [Enable], the sound clip specified in [Sound Clip] will play back at inactive events for the external device input.

[Sound Clip]

Select the sound clip when [Audio Playback at Active Event] or [Audio Playback at Inactive Event] has been set to

[Enable].

You must register the sound clip with [Video and Audio] > [Audio] (P. 148) beforehand.

[Volume]

Enter the volume for the sound clip.

[Switch Day/Night]

Select the Day/Night Mode switching behavior when an external device input event is triggered.

When [Switch to Day Mode] is set, switches to Day Mode when an active event is triggered, and switches to Night Mode

when an inactive event is triggered.

When [Switch to Night Mode] is set, switches to Night Mode when an active event is triggered, and switches to Day Mode

when an inactive event is triggered.

Important

• When [Camera] > [Initial Setting] > [Day/Night] is set to [Auto] (P. 118), [Switch Day/Night] will not happen when an external device

input event is triggered.

• When the [Switch Day/Night] settings switch Day/Night Mode, camera control privileges are released, even if the user has obtained

those camera control privileges using the Camera Viewer or other camera control applications.

Summary of Contents for 1064C001









































































































































































































































































Search results

Summary of Contents for 1064C001

Reviews:

Related manuals for 1064C001

Brands by name

Popular brands

Canon 1064C001, Operation Manual

Search results

Summary of Contents for 1064C001

Reviews:

Related manuals for 1064C001

Brands by name

Popular brands