Canon 1064C001 Operation Manual Download Page 71

Page: 71 / 264

out to.

When operating in Area Zoom mode, an icon (zoom in:

; zoom out:

) is displayed in the frame.

To stop Area Zoom, right-click with the left mouse button held down, and the frame is displayed.

When dragged left-to-right, the camera will zoom in until the area in the frame fills the video display area.

When dragged right-to-left, the camera will zoom out, centered around the area in the frame.

Using Drag to Move to Change the Camera Angle

The camera angle will move in the direction of the arrow.

The maximum length of the arrow is half the width and height of the video display area, and movement speed

increases with the length of the area.

Note

When using Drag to Move, the pan/tilt sliders will not move while the cameras moves.

The camera will stop.



Using [Pan/Tilt/Zoom] in the [Camera Control] Menu

Open the

[Camera Operation] menu and perform camera pan, tilt, and zoom operations.

Release the mouse button.

Click the [Switch Area Zoom/Drag to Move] button to enter

(Drag to Move) mode.

In the video display area, drag in the direction you would like to change the camera angle. An arrow will be

displayed.

Release the mouse button.

Summary of Contents for 1064C001









































































































































































































































































Search results

Summary of Contents for 1064C001

Reviews:

Related manuals for 1064C001

Brands by name

Popular brands

Canon 1064C001, Operation Manual

Search results

Summary of Contents for 1064C001

Reviews:

Related manuals for 1064C001

Brands by name

Popular brands