Canon 1064C001, Operation Manual

Page: 131 / 264

130
Note
• The panorama screen may be slightly different from the actual image. After you have configured view restrictions, be sure to use
the Camera Viewer to confirm they have been reflected correctly. View restrictions are not applied to the video display area of the
restrict view setting.
• The controllable range and range that can be captured are as follows.
• The pan and tilt ranges vary depending on the zoom ratio (view angle).
• If the view restriction will be exceeded as a result of zooming toward wide-angle, the camera will first pan and tilt to a position
where the maximum wide-angle zoom will be within the viewing restriction area. Wide-angle zoom control will then be enabled
within the view restriction area.
• Narrowing the view restriction may also reduce the zoom range.
T
ilt
C
ont
ro
l Ra
nge
Pan Control Range
Maximum Horizontal Capture Range
Maximum Wide-angle Viewing Angle
M
a
xim
u
m Ve
rti
cal
C
a
ptur
e
Ran
g
e
Setting view restrictions
automatically restricts
the camera operating
angle. When using wide-angle, the camera
operating angle would allow capture outside
the view restrictions if the angle remained the
same. Therefore, it is narrowed automatically.
Restricted view angle
Camera operating angle
Captured video range
Camera
Zoom
out
Captured video
Restricted view angle
Zoom
out
First, the center of the
maximum wide-angle
zoom is panned and
tilted.
After panning and
tilting, wide-angle
zoom control is
enabled within the
view restriction.