Canmax Technology CM-2D002 User Manual Download Page 29

Page: 29 / 240

PROGRAM THE INTERFACE

2-4 Keyboard Style

This programs keyboard styles, such as Caps Lock and Shift Lock.

If you have used

Keyboard Conversion

settings, they will override any of the

following Keyboard Style settings.

Default = Regular.

Regular

is used when you normally have the Caps Lock key off.

Caps Lock

is used when you normally have the Caps Lock key on.

Shift Lock

is used when you normally have the Shift Lock key on (not common

to U.S. keyboards)

Automatic Caps Lock

is used if you change the Caps Lock key on and off.

The software tracks and reflects if you have Caps Lock on or off. This

selection can only be used with systems that have an LED that notes

the Caps Lock status (AT keyboards).

Regular

Caps Lock

Shift lock

Auto Caps lock

2-4 Keyboard Style

Summary of Contents for CM-2D002
















































































































































































































































Search results

Summary of Contents for CM-2D002

Reviews:

Brands by name

Popular brands

Canmax Technology CM-2D002, User Manual

Search results

Summary of Contents for CM-2D002

Reviews:

Brands by name

Popular brands