Canmax Technology CM-2D002, User Manual

Page: 222 / 240

222
9. TROUBLESHOOTING
9-1 Repairs
Repairs and/or upgrades are not to be performed on this product.
These services are to be performed only by an authorized service center.
9-1-1 Inspecting Cords and Connectors
Inspect the scan engine’s interface cable and connector for wear or other signs
of damage. A badly worn cable or damaged connector may interfere with scan
engine operation. Contact your distributor for information about cable
replacement.
9-2 Troubleshooting
The scan engine automatically performs self-tests whenever you turn it on.
If your scan engine is not functioning properly, review the following
Troubleshooting Guide to try to isolate the problem.
Is the power on? Is the red or green aiming illumination line on?
If the aiming line doesn’t appear, check that:
• The cable is connected properly.
• The host system power is on (if external power isn’t used).
Is the scan engine having trouble reading your symbols?
If the scan engine isn’t reading symbols well, check that the symbols:
• Aren’t smeared, rough, scratched, or exhibiting voids.
• Aren’t coated with frost or water droplets on the surface
• Are enabled in the scan engine or in the decoder to which the scan engine
connects.
9-1 Repairs
9. MAINTENANCE AND TROUBLESHOOTING
9-2 Troubleshooting
9-1-1 Inspecting Cords and Connectors