Canmax Technology CM-2D002 User Manual Download

Page: 167 / 240

167

SYMBOLOGIES

Point and Shoot

Off

6-32-4 QR Code Page

QR Code pages define the mapping of character codes to characters. If the

data received does not display with the proper characters, it may be because

the bar code being scanned was created using a code page that is different

from the one the host program is expecting. If this is the case, scan the bar

code below, select the code page with which the bar codes were created (see

ISO 2022/ISO 646 Character Replacements

), and scan the value and the

Save barcode from the

Programming Chart

on the inside the back cover of this

manual. The data characters should then appear properly.

QR Code Page

6-32-4 QR Code Page

Summary of Contents for CM-2D002
















































































































































































































































Search results

Summary of Contents for CM-2D002

Reviews:

Related manuals for CM-2D002

Brands by name

Popular brands

Canmax Technology CM-2D002, User Manual

Search results

Summary of Contents for CM-2D002

Reviews:

Related manuals for CM-2D002

Brands by name

Popular brands