![background image](http://html.mh-extra.com/html/candk-systems/system-2316e/system-2316e_installation-instructions-manual_478078025.webp)
25
SYSTEM 2316E/2316EC Installation Manual
The majority of the keypad commands apply to both the LED and Alpha Plus keypads. Some keypad commands, however, apply to the
Alpha Plus (LCD) keypad only.
The following keypad commands apply to both the LED and Alpha Plus keypads:
KEYPAD OPERATION COMMAND SUMMARY
Function
Comments
Keystroke Sequence
Arm/Disarm
Delays active
[Combination] [#]
Arm Tones Toggle On/Off
[*] [5] [4] [#]
Audible Feedback Toggle
[*] [5] [1] [#]
Bypass Zone (n)
[n] is zone # 1 - 16; Combo may be
[Combination] [Bypass] [n] [#]
required
Chime On/Off
Turns system Chime on/off (Combo may be
[Combination] [*] [5] [#]
required)
Chime Toggle
Toggles Chime feature on keypad only
[*] [5] [3] [#]
Change Combo using
Must be done from User #1
[Master Combo] [*] [0] [#] [User Number]
Master Combo
[New Combo] [#] [New Combo] [#]
Clear Alarm Memory
[*] [1] [#]
Exit Programming
[*] [#]
Fire Alarm
Keypad activated
[F] (Hold for 3 seconds)
Group Shunt and Arm
Arms the system and all zones programmed for
[Combination] [*] [4] [#]
group bypass, CL 30 - 3F, Digit Position (3),
are shunted simultaneously; Combo may be
required
(This is also called Home-Arming)
Group Shunt and Instant
Same as Group Bypass (above) except system [Combination] [*] [4] [7] [#] or
Arm
is Instant Armed (Exit Delay operates
[Combination] [*] [7] [4] [#]
normally, upon expiration of Exit Delay, all
delayed zones are converted to Instant - No
Entry Delay). Combo may be required
(Also called Instant Home-Arming)
Instant Arm
Arms system and converts delayed zones to
[Combination] [*] [7] [#]
Instant (Exit Delay active, No Entry Delay),
Combo may be required
Keypad Activated RPS
If enabled, CL 0B(3); Combo may be required [Combination] [*] [0] [2] [#]
Medical Alarm
Keypad activated
[E] (Hold for 3 seconds)
Police/Panic Alarm
Keypad activated
[P] (Hold for 3 seconds)
Pre-warn Toggle On/Off
[*] [5] [2] [#]
Reset Aux Power
If resettable devices are connected to
[*] [6] [2] [#]
Terminals 5 and 6
Reset Panel
[Master Combination] [*] [6] [8] [#]
Test - Battery
Use after correcting Low Battery problem
[*] [6] [4] [#]
Test - Bells
Combo may be required
[Combination] [*] [6] [3] [#]
Test - Central Station
Combo may be required
[Combination] [*] [6] [1] [#]
Test - Local Walk-Test
[*] [6] [0] [#]
NOTE:
For additional information about Combination Command requirements, see page 27 and CL 09 (2).
The following Keypad Commands apply to the Alpha Plus keypad only:
Function
Comments
Keystroke Sequence
Backlight Toggle On/Off
[*] [8] [#]
Display Keypad Model
[*] [9] [#]
& Revision Number
The following keypad commands are Installer Only Commands:
Function
Comments
Keystroke Sequence
Alpha Keypad Programming Start Programming the Keypad
[Installer Combination] [*] [0] [1] [#]
Alpha Keypad Test
[*] [6] [7] [#]
Kill/Revive Panel
[Installer Combination] [*] [6] [9] [#]
Panel Programming
Start Programming the Panel
[Installer Combination] [*] [0] [#]