![background image](http://html.mh-extra.com/html/candk-systems/system-2316e/system-2316e_installation-instructions-manual_478078002.webp)
2
SYSTEM 2316E/2316EC Installation Manual
FCC Notice
This equipment complies with FCC Rules, Part 68.
On the outside of this equipment is a label that contains, among other infor-
mation, the FCC Registration Number and Ringer Equivalence Number (REN)
for this equipment. If requested, provide this information to your telephone
company.
The REN is useful to determine the quantity of devices you may connect to
your telephone line and still have all of those devices ring when your number
is called. In most, but not all areas, the sum of the RENs devices should not
exceed five (5.0). To be certain of the number of devices you may connect to
your line, as determined by the REN, you should call your local telephone
company to determine the maximum REN for your calling area.
Should you experience trouble with the telephone lines, disconnect the equip-
ment from the line to determine the source of the trouble. If it is determined
that the equipment is malfunctioning, discontinue its use until the malfunc-
tion has been corrected. Any repairs or alterations made by the user to this
equipment, or equipment malfunctions, may give the telephone company
Industry Canada
NOTICE: The Industry Canada label identifies certified equipment. This certi-
fication means that the equipment meets telecommunications network pro-
tective, operational and safety requirements as prescribed in the appropriate
Terminal Equipment Technical Requirements documents. The Department
does not guarantee the equipment will operate to the users satisfaction.
Before installing this equipment, users should ensure that it is permissible to
be connected to the facilities of the local telecommunications company. The
equipment must also be installed using an acceptable method of connection.
The customer should be aware that compliance with the above conditions
may not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative des-
ignated by the supplier. Any repairs or alterations made by the user to this
equipment, or equipment malfunctions, may give the telecommunications
company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground con-
nections of the power utility, telephone lines and internal metallic water pipe
system, if present, are connected together. This precaution may be particu-
larly important in rural areas.
Caution:
Users should not attempt to make such connections themselves,
but should contact the appropriate electric inspection authority, or electri-
cian, as appropriate.
NOTICE: The Ringer Equivalence Number
(REN) assigned to each termi-
nal device provides an indication of the maximum number of terminals al-
lowed to be connected to a telephone interface. The termination on an inter-
face may consist of any combination of devices subject only to the require-
ment that the sum of the Ringer Equivalence Numbers of all the devices does
not exceed 5.
This Class B digital apparatus meets all requirements of the Canadian Inter-
ference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
IC Certification: 1140 9153 A
Ringer Equivalence: 0.5
Table of Contents
Subject
Page No.
FCC Notice
2
Industry Canada
2
Introduction
3
UL Compliance
3
Zone Programming
3
European Compliance
3
Installation
3
Mounting
3
System 2316E Terminal Label
4
System 2316EC Terminal Label
5
Before You Start
6
Wiring the Panel
6
Standby Battery
6
AC Power (System 2316E)
6
AC Power (System 2316EC)
6
Audible Output
6
Setting Up the 2350-SUP
6
Auxiliary Power (Switched and Unswitched)
7
Arming Stations
7
Loop Inputs
8
Tamper Switch Installation
8
Telephone Interface
9
System Start-Up
9
Standby Battery Time
9
Voltage Variations
9
Factory Settings
9
Default Program Setup
9
Programming Options (Alphabetical List)
10
Programming the Panel
10
Starting Panel Programming
10
Programming with the LED Plus Keypad
10
Programming with the Alpha Plus Keypad
11
Programming Hexadecimal Numbers
11
End of Programming Segment
11
Programming the Alpha Plus Keypad
11
Keypad Message Programming
11
Programming Options (Numerical Order)
12
End-User Information
24
Testing
24
To the Installer
24
Telephone Line Problems
24
Watchdog Indicator
24
Limitations of Your Alarm System
24
Keypad Operation Command Summary
25
Survey of Most Common Questions
26
Recommendations for Reducing False Alarms
28
Programming Worksheets
30
cause to request the user to disconnect the equipment. Repairs to this equip-
ment should be made by an authorized agent of C&K Systems, Inc. Contact
your local alarm installation company for service.
Should this equipment cause harm to the telephone network, the telephone
company may temporarily discontinue your service. If possible, they will pro-
vide you with advance notice. Otherwise they will notify you as soon as pos-
sible. The telephone company will also advise you of changes in its facilities,
equipment, operations or procedures which could affect the operation of your
equipment, allowing you the opportunity to maintain uninterrupted service.
You will also be advised of your right to file a complaint with the FCC.
This equipment must not be used on party lines or coin operated phone lines.
FCC Part 15 Notice
This equipment has been tested and found to comply with the limits for Class
B digital devices, pursuant to Part 15 of the FCC Rules. These limits are de-
signed to provide reasonable protection against harmful interference in a resi-
dential installation.
This equipment generates, uses, and can radiate radio frequency energy,
and if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guaran-
tee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television re-
ception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient the radio/television antenna;
Connect the AC transformer to a different outlet so that the equipment and
radio/television are on different branch circuits;
Relocate the equipment with respect to the radio/television;
Consult the dealer or an experienced radio/television technician for help.
FCC Registration Number: C2DCHN-25602-AL-E
Ringer Equivalence: 0.67B