![background image](http://html.mh-extra.com/html/candk-systems/system-2316e/system-2316e_installation-instructions-manual_478078014.webp)
14
SYSTEM 2316E/2316EC Installation Manual
Command Location 0B: Communications Control
Digit Position (1): Delay Before Dial Time
0 = 0 secs
1 = 10 secs
2 = 20 secs
3 = 30 secs
4 = 40 secs
5 = 50 secs
6 = 60 secs
7 = 70 secs
8 = 80 secs
9 = 90 secs
0 = 100 secs
1 = 110 secs
2 = 120 secs
3 = 130 secs
4 = 140 secs
5 = 150 secs
Default Values
3
1
1
0
0
0
B
8
(1)
(2)
(3)
(4)
(5)
(6)
#
Digit Position (2): Dial Type
1 = DTMF - Touch Tone (10/sec)
2 = DTMF (5/sec)
3 = Pulse (10/sec)
Digit Position (3): Enable Keypad Activated RPS
0 = No
1 = Yes; allows remote programming to start from on-site keypad command
Digit Position (4): RPS Enable
0 = No
1 = Yes; allows remote programming to start from off-premise location
Digit Position (5): Phone Ring Type
0 = Single ring; uniformly timed rings with long pauses between rings
1 = Double ring; rings twice quickly followed by a long pause then rings twice again
Digit Position (6): Dialing Attempts
1 = 1 try
2 = 2 tries
3 = 3 tries
4 = 4 tries
5 = 5 tries
6 = 6 tries
7 = 7 tries
8 = 8 tries
9 = 9 tries
0 = 10 tries
1 = 11 tries
2 = 12 tries
3 = 13 tries
4 = 14 tries
5 = 15 tries
(1)
(2)
(3)
(
4)
(5)
(6)
0
0
0
0
0
0
C
0
Default Values
Digit Positions (1) - (6): Account Number
#
Valid entries are 0 - F.
The Account Number is right justified. The last digit must be in Position (6).
The SYSTEM 2316E/2316EC will read the account number using:
Digit Positions (4) - (6) with 3-digit accounts
Digit Positions (3) - (6) with 4-digit accounts
Digit Positions (1) - (6) with 6-digit accounts
Fill all unused Digit Positions with 0s.
Account Number 1 is used in
conjunction with Receiver Number 1
Command Location 0C: Account Number 1
A
B
C
D
E
F
Hexadecimal Value
Key Strokes
0
1
2
3
4
5
PROGRAMMING CONVERSIONS
CL 0B and 0C
NOTE:
If the panel fails to make a connection, the number of Dialing Attempts
programmed causes the following operation:
Even number
of Dialing Attempts (2, 4, 6 etc.) -- the Dialing Attempts
sequence is repeated every four hours until connection is made.
Odd number
of Dialing Attempts (1, 3, 5 etc.) -- the Dialing Attempts
sequence only occurs once, even if connection was not made.