![background image](http://html.mh-extra.com/html/candk-systems/system-2316e/system-2316e_installation-instructions-manual_478078023.webp)
23
SYSTEM 2316E/2316EC Installation Manual
Digit Position (4): Minutes - 1s.
(1) (2) (3) (4) (5) (6)
B 4
1 3 2 8 3 0
HOUR MINUTE SECOND
Digit Position (6): Seconds - 1s.
Digit Position (3): Minutes - 10s
Digit Position (2): Hour - 1s.
Digit Position (1): Hour - 10s
This command will set the hour, minute, and second
in the panel. The time is set in BCD (military time).
Previously stored data is not displayed during programming.
Command Location B4: Set Real-Time Clock (Hour, Minute, Second)
(2)
(3)
(4)
(5)
(1)
(6)
B 4
Digit Position (5): Seconds - 10s
Command Location B3: Set Real-Time Clock (Year, Month, Day)
This command will set the day, month, and year in the
panel, and will not take effect until Command B4 is
programmed.
(2)
(3)
(4)
(5)
(6)
B 3
(1)
Previously stored data is not displayed during programming.
Digit Position (1): Year - 10s
Digit Position (2): Year - 1s.
Digit Position (3): Month - 10s
Digit Position (4): Month - 1s.
Digit Position (5): Day - 10s
Digit Position (6): Day - 1s.
(1) (2) (3) (4) (5) (6)
B 3
9 8 0 2 1 2
Example: If the date were February 12, 1998, B3 would be programmed
YEAR
MONTH
DAY
Command Location A0: Test Report Countdown Timer
This command will set the time when the first Test Report is transmitted to the central
station. The panel will use this transmission time each time it's powered up or the
CPU is reset (unless Command Location A0 is reprogrammed).
Previously stored data is not displayed during programming.
(1)
A
0
Digit Position (1): Set Test Report Countdown Timer
NOTE: Refer to CL 2B for setting the time interval
between Reports.
0 = 1/4 hour
1 = 1/2 hour
2 = 1 hour
3 = 2 hours
4 = 3 hours
5 = 4 hours
6 = 6 hours
7 = 8 hours
8 = 10 hours
9 = 12 hours
0 = 14 hours
1 = 16 hours
2 = 18 hours
3 = 20 hours
4 = 22 hours
5 = 24 hours
Example: The time is 1500 hours (3:00 pm). You want the first Test Report to
transmit at 0100 hours (1:00 am). 3:00 pm + 10 hours = 1:00 am.
Program the value "8" in Memory Location A0.
CL A0, B3 and B4
Example: If the time were 28 and one-half minutes past 1 in the afternoon, B4 would be programmed