![background image](http://html.mh-extra.com/html/candk-systems/system-2316e/system-2316e_installation-instructions-manual_478078012.webp)
12
SYSTEM 2316E/2316EC Installation Manual
Command Location 00: Installer Combination
(1)
(2)
(3)
(4)
(5)
(6)
0
1
2
3
4
5
0
0
Default Values
Digit Positions (1) - (6): Installer Combination
Combination must have 6 digits. Valid entries are 0 - 9.
Command Location 01 - 08 and 51 - 68:
User Arming Type and Combination
(1)
(2)
(3)
(4)
(5)
(6)
9
1
2
3
4
E
1
0
**Default Values
**Default Values are different for each user.
Refer to the SYSTEM 2316E/2316EC Program-
ming Worksheet at the end of this manual for
other user default values.
01 = User #1 (Master)
02 = User #2
03 = User #3
04 = User #4
05 = User #5
06 = User #6
07 = User #7
08 = User #8 (Guest)
51 = User #9
52 = User #10
53 = User #11
54 = User #12
55 = User #13
56 = User #14
57 = User #15
58 = User #16
59 = User #17
5A = User #18
5B = User #19
5C = User #20
5D = User #21
5E = User #22
5F = User #23
60 = User #24
61 = User #25
62 = User #26
63 = User #27
64 = User #28
65 = User #29
66 = User #30
67 = User #31
68 = User #32
0 = Arm Only, with Closing Report, Shunting Allowed
1 = Disarm Only, with Opening Report, Shunting Allowed
2 = Arm and Disarm, with O/C Reports, Shunting Allowed
7 = Arm Only, No Closing Report, Shunting Allowed
8 = Disarm Only, No Opening Report, Shunting Allowed
9 = Arm and Disarm, No O/C Reports, Shunting Allowed
4 = Arm Only, with Closing Report, No Shunting
5 = Disarm Only, with Opening Report, No Shunting
6 = Arm and Disarm, with O/C Reports, No Shunting
Digit Positions (2) - (6): Arming Combination (PIN)
Combination may have from 2 - 5 digits. Valid entries are 0 -9.
1 = Arm Only, No Closing (C) Report, No Shunting
2 = Disarm Only, No Opening (O) Report, No Shunting
3 = Arm and Disarm, No O/C Reports, No Shunting
Digit Position (1): Arming Type
A
B
C
D
E
F
Hexadecimal Value
Key Strokes
0
1
2
3
4
5
PROGRAMMING CONVERSIONS
CL 00 - 08 & 51 - 68
NOTE:
Some programming locations allow
variable-length data and require an
End-of-Number (EON) character.
Program 4 ("E") after the last
digit. Fill remaining unused Positions
with "0". The EON character is not
required if the last digit is in position
6.
NOTE:
Opening and Closing Reports
must be enabled. See CL 2C
Digit Positions 1 and 3 for
additional information.
User #1 shown