Operation and maintenance instructions
Series PME CANopen proportional pressure
regulator
5000054187
Ver. 01
9
6.
General characteristics and conditions of use
General characteristics and conditions of use
PME1
PME2
Reference standards
CE; RoHs
Materials
Body: Aluminum Cover: Technopolymer Seal:NBR and FKM
Assembly position
Any
Overall dimensions
L = 50 mm; W = 50 mm; H = 88 mm
L = 50 mm; W = 50 mm; H = 133
mm
Weight
350gr circa
630gr circa
Medium and its quality
Filtered and non-lubricated compressed air of class 7.4.4 according to
ISO 8573.1. Inert gases and oxygen only for OX1 versions.
Maximum free flow rate
(Pin 10 bar)
Measured at ±5% of Preg
Pout 6 bar: 1.100 l/min ANR (PRE104)
Pout 4 bar: 1.200 l/min ANR (PRE104)
Pout 6 bar: 4.500 l/min ANR (PRE238)
Pout 4 bar: 5.200 l/min ANR (PRE238)
Maximum system pressure
drops
20 cc/min
10 cc/min
Maximum inlet pressure
(refer to coding table)
11 bar (D); (G) and (F)
Regulated pressure range
0,05 - 10,3 bar (0,72-150 PSI)(D)
0,05 - 6 bar (0,72-87 PSI)(F) 0,05 - 7 bar (0,72-101,5 PSI) (G)
Number of ways
3
Ambient temperature
0 ÷ 50 °C
Protection class
IP65 (according to EN 60529)
Open-type (according to UL 61010)
Pneumatic ports
Standard version: G1/4; G1/8; 1/4 NPTF
Manifold version: G1/4; G1/8; 1/4 NPTF
Standard version: G1/4, G3/8
Manifold version: G1/4
Vibrations sine
According to EN 60068 part
2-6:2009-11 (table B.1)
Frequency range: 10-500Hz
Displacement 0-peak: 0,75mm or 100 m/s
2
Number of cycles: 10
Continuous shock
According to DIN EN 60068-
2-27:2010-02 (table A.1)
Peak acceleration: 150 m/s
2
Duration: 11ms
Pulse shape: half sine
Electric port
M12 5 Pin Male A-key
Input signal setpoint
CANopen profile Cia301 and Cia408 (optional)
Factory values
Address: 127; Baud Rate: 1Mbps; Unit of measure for pressure: mBar
