Operation and maintenance instructions
Series PME CANopen proportional pressure
regulator
5000054187
Ver. 01
31
•
Emergency message transmission: allows you to enable / disable the transmission of the
emergency messages described in the CiA 301 profile. If the transmission is disabled, no acyclic
diagnostic message will be generated, the errors will only be visible from the system LED and by
reading the specific objects.
10.3.5.
Password
By pressing the "Set new password" button you can enter a new password (up to 4 alphanumeric
characters) which will be saved in the device memory. If you forget the customized password, it will
no longer be possible to modify the regulator parameters (in this case, contact the Camozzi Service
to reset the regulator password to the factory settings). The password is not required to view the
parameters.
10.3.6.
Saving parameters
All modified parameters (including the password) are saved in the regulator memory by pressing
the “Write new parameters” button. The procedure requires entering the regulator password. The
factory password is “0000”.
120 ohm
5
4
CAN_H
CAN_L
