backrest.
12. FITTING THE BASKET. WARNING!
Never overload the
basket with more than 2kgs.
13. POSSIBLE COMBINATIONS:
The diagram shows the age/weight for the use of the
various features and their correct assembly.
The carrycot and car seat are provided with the special
quick fastening and removal system called “Quicky
system”. The pushchair is reversible: it can be fitted on the
chassis both rear facing so the seat is facing mum or Dad
or forward facing so the seat looks towards the road (Via
vai system Reverse).
14. HOW TO REMOVE THE REVERSIBLE SEAT UNIT
it is advisable to remove the seat unit when using the
carrycot or car seat, to eliminate soiling and to decrease
the weight of the product. The seat unit is pre assembled
in the forward facing position.
14a.
lower the fabric covering from the armrests.
14b.
Take hold of handles “F”, situated one on either side
of the seat unit. Pull backwards on levers “V”, on either
side of the handles
14c.
simultaneously lift the seat unit from the chassis, and
keep safely until required at a later stage.
WARNING!
DO NOT ATTemPT TO RemOVe THe seAT uNiT
WiTH THe cHilD sTill seATeD iNsiDe THe PusHcHAiR.
HOW TO FIT & REMOVE THE CARRYCOT FROM THE
CHASSIS
15a.
Place the carrycot on the pushchair armrests taking
care to align the attachment system”D”, situated on either
side of the carrycot, with that of the attachment housing
“e” situated within the pushchair armrests. Push down on
the carrycot until a click can be heard, and the carrycot is
securely fitted into position. Be sure to verify that the
carrycot is correctly locked into position before use.
15b.
To remove the carrycot press down on button “A”,
followed by button “B” on the pushchair armrests. Whilst
still holding down button “B” remove the carrycot from the
chassis.
16. USING THE CARRYCOT
16a.
To fasten the hood to the carrycot, insert the metal
tabs into the slots at the sides of the handle. close the
press fasteners on the back of the hood.
16b.
By opening the flaps located under the body, the
carrycot converts into a rocking cot.
16c.
The angle of the handle can be adjusted by pressing
the buttons at the sides of the handle at the same time
(safety mechanism).
16d.
Aerated base.
16e.
To raise the backrest, push the handle located
underneath inwards towards the body. To lower it, press
the handle slightly inwards, lift it and move it back to the
required position.
16f.
To fit the footmuff, close the press fasteners as shown
in the diagram.
16g.
The hood is adjustable in height.
17.
To remove the hood, release the ends of the metal
tabs.
HOW TO FIX AND RELEASE THE CAR SEAT FROM THE
CHASSIS
18a.
Place the car seat on the pushchair armrests in
proximity of the attachment housing “e”. Push the car seat
down until it clicks into position. Verify that the car seat is
securely and safely locked into position.
18b.
To remove the car seat press down on button “A”,
followed by button “B” on the pushchair armrests. Whilst
still holding down button “B” remove the car seat from the
chassis.
FITTING AND ADJUSTMENT OF THE 5-POINT HARNESS:
19a. WARNING!
Before fitting the belts, look carefully at
the diagram to check that the seat fastening systems
correspond correctly with: the shoulder belts (“s” with “s1”
or “s2”), the waist belt (“a” with “A”) and the crotch strap
(“g” with “G1 or “G2”).
WARNING!
choose the correct slots
according to the age and size of the baby: “G1” and “s1”
from 0 to 6 months, “G2” and “s2” from 6 to 36 months.
0-6 MONTHS:
19b. FITTING THE SHOULDER BELTS:
insert the buckles
“s” into slots “s1”.
WARNING!
All the buckles must be
passed through the material slots and the rigid structure
of the backrest in order to be inserted correctly, as shown
in the diagrams.
19c. FITTING THE WAIST BELT:
insert buckles “a” in slots
“A”.
19d. FITTING THE CROTCH STRAP:
insert buckle g” in
“G1”.
WARNiNG! Before use, check that the belts are not twisted
and that they are secured properly.
19e. CORRECT FITTING OF THE BELTS:
Fasten the belt,
make sure that the two hooks are fixed inside the main
buckle and check that the babyʼs legs are positioned one
either side of the crotch strap.
19f.
Belt adjustment.
19g.
Opening the buckles.
WARNING!
Always use the 5-point safety harness.
20. REMOVING THE BELTS:
Remove the belts as shown in
the diagram.
6-36 MONTHS:
21.
Fit the 5-point harness taking care that buckles “s”
correspond with “s2” and buckles “g” with “G2”(see point
19a).
22. FITTING THE SEAT REARWARD FACING
(0-12 months):
Hold the handles at the sides of the seat, position the seat
on the chassis so that the indicators on the chassis
correspond with the slots on the seat (1). Press down until
the seat is fastened in place with a “click” (2).
23.
Fit the bumper bar into the housing on the rear of the
armrests. Push into position until a click can be heard.
WARNING!
Be sure to verify the correct position of the
bumper bar. The side with the 2 buttons “T”, should be
facing the backrest.
24. HOW TO ASSEMBLE THE HOOD REARWARD FACING:
adjust the plastic joint to position 2, by pressing the
internal buttons, making sure to align the fitting to
position “i”, illustration 2. insert the hood horizontally into
the housing situated at the front of the armrests, until a
“clicK” can be heard.
25.
To completely open the hood, push downwards on the
tensioning bars on either side.
26.
Raise the seat unit fabric flaps and fasten them into
position on the armrests with the press studs.
REMOVING THE HOOD & BUMPER BAR FROM THE
REARWARD FACING POSITON
27.
To remove the bumper bar press buttons “T”
simultaneously, and at the same time slide out from the
chassis.
28.
To remove the hood push up on leverʼs “u” and remove
by pulling away from the chassis.
29. 12-36 MONTHS,
USING THE SEAT FORWARD FACING:
it is advisable to use the pushchair seat unit in the forward
facing position when the child is between 12 – 36 months.
IMPORTANT!
To remove the seat unit, follow the
instructions entitled “HOW TO RemOVe THe seAT uNiT”
WARNING!
Be sure to verify that the seat unit is securely
and safely locked into position, by pushing downwards
until a“click” can be heard, confirming the locked position.
30.
To fit the hood in the forward facing position, adjust
27
INSTRUCTIONS FOR USE
Summary of Contents for DINAMICO
