CAE Healthcare Vimedix Abdo User Manual Download Page 291

Page: 291 / 480

Using the Ob/Gyn Ultrasound Simulator

265

Adjusting the Gain

From the

Settings

panel, click the

Gain

button to access the

Gain

slider.

The Settings Panel

To increase or decrease the gain of the Ultrasound display, move the

Gain

slider to the left or right.

Users can also adjust settings by using the plus or minus buttons on each side.

The Gain Slider

NOTE:

When using the expanded toolbar view, adjust the gain by clicking on the

Gain

slider located in

the Settings section of the Ultrasound panel.

The Settings Section

NOTE:

The depth of field, contrast and gain startup values can be modified in the Simulation Settings

window.

The

Gain

button

The

Gain

slider

Summary of Contents for Vimedix Abdo
































































































































































































































































































































































































































































































Search results

Summary of Contents for Vimedix Abdo

Reviews:

Related manuals for Vimedix Abdo

Brands by name

Popular brands

CAE Healthcare Vimedix Abdo, User Manual

Search results

Summary of Contents for Vimedix Abdo

Reviews:

Related manuals for Vimedix Abdo

Brands by name

Popular brands