CAE Healthcare Vimedix Abdo User Manual Download Page 106

Page: 106 / 480

Using the Multipurpose

(Cardiac/Abdo)

Simulator

Vimedix

™

The Structures Visibility window appears.

The Structures Visibility Window

2. Uncheck the boxes in the left column to remove structures from the AR

display.

3. Uncheck the boxes in the right column to remove artifacts from the

Ultrasound display.

NOTE:

Some structures cannot be removed from the Ultrasound display.

These structures are denoted by a lock symbol.

4. Click the

Close

button to apply the changes and exit the Structures

Visibility window.

Summary of Contents for Vimedix Abdo
































































































































































































































































































































































































































































































Search results

Summary of Contents for Vimedix Abdo

Reviews:

Related manuals for Vimedix Abdo

Brands by name

Popular brands

CAE Healthcare Vimedix Abdo, User Manual

Search results

Summary of Contents for Vimedix Abdo

Reviews:

Related manuals for Vimedix Abdo

Brands by name

Popular brands