Cabletron Systems SmartCell ZX-250, User Manual

Page: 78 / 132

4-32 SmartCell ZX-250 User Guide
Performing Hardware Maintenance Switch Administration
If a system failure occurs while the core dump feature is enabled, the SmartCell ZX-250 console appears similar to the
example below. The SmartCell ZX-250 then begins sending images of its memory to the core dump files on the TFTP
server.
Illegal access. Bus Error.
IP: e0103288 PFP: e04be080
r0(pfp): e04be040 r1(sp): e04be0c0 r2(rip): e00dd7dc
r3 : 00000000 r4 : e00f8f0c r5 : e0409f10
r6 : 00000003 r7 : e00f8f0c r8 : e0409f40
r9 : 00000003 r10 : 00000030 r11 : e00f8f0f
r12 : 00000008 r13 : 00000001 r14 : e00d22f0
r15 : 00000008
d2000000: Core Dump
Common DRAM dumped to /tftpboot/bobr/core_cmn
CPU DRAM dumped to /tftpboot/bobr/core_cpu
ffffffff ffffffff ffffffff ffffffff *................*
d2000010: ffffffff ffffffff ffffffff ffffffff *................*
d2000020: ffffffff ffffffff ffffffff ffffffff *................*
d2000030: ffffffff ffffffff ffffffff ffffffff *................*
d2000040: ffffffff ffffffff ffffffff ffffffff *................*
d2000050: ffffffff ffffffff ffffffff ffffffff *................*
d2000060: ffffffff ffffffff ffffffff ffffffff *................*
d2000070: ffffffff ffffffff ffffffff ffffffff *................*
d2000080: ffffffff ffffffff ffffffff ffffffff *................*
d2000090: ffff
SmartCell ZX Start-up Code
Cabletron Systems Inc.
Copy the information displayed on the console and send it to your Cabletron customer support representative along
with the core dump files.
4.9 PERFORMING HARDWARE MAINTENANCE
This section gives generic instructions about how to access all user upgradable and replaceable components in the
SmartCell ZX-250 ATM switch.
4.9.1 Required Tools
U
Number 1 Phillips head screw driver
U
Small flat-blade screw driver
U
Medium flat-blade screw driver
U
Cabletron-approved ESD grounding device (such as a wrist strap)
4.9.2 Internal Components
Figure 4-5 is a diagram of the internal components common to the SmartCell ZX-250 family of switches. The five
major components of the ZX-250 are
U
CPU board
U
Main Switch Module
U
I/O modules (at least two)