Cabletron Systems SmartCell ZX-250, User Manual

Page: 42 / 132

3-4 SmartCell ZX-250 User Guide
Creating an Emulated LAN IP Over ATM and LANE
s•
Enter the
start LECS
command to activate LANE server services on this switch.
SmartCell ZX # start lecs
NOTICE - 'LECS' ***** LECS started *****
SmartCell ZX #
¢•
Create an ELAN on your SmartCell ZX-250 switch by executing the
add elan
command. The
following is an example.
SmartCell ZX # add elan
ELANNumber(0) : 1
<1 is used instead of the default, (0)
ELANName(ELAN001): Marketing <ELAN is named Marketing instead of the default, (ELAN000)
ConnectMethod(SVC):
ELANType(802.3)
<The default (Ethernet) is used
Multipoint(YES) :
MTU(1516) :
Distribute(PROXY) :
SmartCell ZX #
••
Create a client for the switch on the ELAN. For example, enter
SmartCell ZX # add laneclient
ClientNumber(0) :1
<One is used instead of the default, (0)
LanName(ELAN001) : Marketing < ELAN name is Marketing, not the default, (ELAN001)
ServerType(LECS) :
ServerAddress()
<No LANE server address is specified; see note below
IPAddress() : 90.1.1.1 < IP address and subnet mask are included only as examples
NetMask(255.0.0.0): 255.255.255.0
MTU(1516) :
SmartCell ZX #
2 p›F
The command
add laneclient
always prompts you with a subnet mask that is
appropriate for the IP address. However, if necessary, you can change the subnet
mask to correspond to the strategy employed within your networks.
2 p›F
When you create a client, it automatically finds the LECS address using ILMI.
As the local client joins the ELAN, the following messages are sent to the Event log:
NOTICE - 'ZLESSRV' LES Join 39:00:00:00:00:00:00:00:00:00:14:41:80:00:20:D4:
14:41:82:00
NOTICE - 'ZLESSRV' BUS Connect 39:00:00:00:00:00:00:00:00:00:14:41:80:00:20:D4:
14:41:82:00
% "¤›apm
Never create an ELAN (or ELAN client) with the same subnet as the SmartCell
ZX-250 Ethernet port.