Cabletron Systems SmartCell ZX-250, User Manual

Page: 77 / 132

SmartCell ZX-250 User Guide 4-31
Switch Administration Saving Core Dumps
Enter the
set CoreDump
command to enable the core dump feature. For example,
SmartCell ZX # set coredump
EnableCoreDump(n) : y
< “y” to enable core dump feature
ServerIP() : 204.95.77.240
< IP address of my TFTP server
CoreDumpFile() : /tftpboot/bobr/core
< full path name for core dump files
userName() : bobr
< login name on the server
UserPassword() :
< password
SmartCell ZX #
2 p›F
The
set CoreDump
command uses FTP to create the
core_cpu
and
core_cmn
files. If your server does not run FTP, create these files manually. Then execute the
set CoreDump
command.
2 p›F
On UNIX systems, make sure that the permissions are set correctly so that data
can be written.
2 p›F
For security, the
set CoreDump
command retains your password only long enough
to create the core dump files. Your password is then dropped from system
memory.
To see the current core dump configuration, enter the
show coredump
command.
SmartCell ZX # show coredump
Core Dump Enabled : Yes
Core Dump Server IP : 204.95.77.240
Core Dump File : /tftpboot/bobr/core
SmartCell ZX #