Cabletron Systems SmartCell ZX-250, User Manual

Page: 33 / 132

SmartCell ZX-250 User Guide 2-15
Switch Installation and Setup Using the Console
2.6.2 Console Time-out
The console can be configured to exit if it does not sense a key stroke within a defined length of time. By default, the
SmartCell ZX-250 is set to never time-out (value = 0). To activate the time-out feature, use the
set ConsoleTimeOut
command to adjust the time-out period:
SmartCell ZX # set consoletimeout
Timeout(0) : 30
<Will time-out in 30 minutes without input
Confirm (y/N)? : y
SmartCell ZX #
2.6.3 Creating an Alias
Use the
add alias
command to create shorter or easier-to-remember names for command lines. For example:
SmartCell ZX # add alias
AliasName() : traffic
AliasedString() : set switchtrafficcongestion
SmartCell ZX #
The above example creates an alias (
traffic
) that you can enter in place of the command
set
SwitchTrafficCongestion
. For example:
SmartCell ZX # traffic
Queue1EFCIThreshold(4096) :
Queue2EFCIThreshold(4096) :
Queue3EFCIThreshold(4096) :
Queue4EFCIThreshold(4096) :
LowEPDWatermark(10922) :
HighEPDWatermark(21845) :
RMCellMarkingEnable(1) :
EFCIMarkingEnable(1) :
SmartCell ZX #
Enter the
show alias
command to display a list of all defined aliases and the command lines to which they correspond.
:SmartCell ZX # show alias
AliasName(ALL) :
Alias List
==============================================================================
Index Alias Name : Aliased Command
1 PING : Start ping
2 xxx : show portconfig
3 traffic : set switchtrafficcongestion
SmartCell ZX #