Cabletron Systems SmartCell ZX-250, User Manual

Page: 31 / 132

SmartCell ZX-250 User Guide 2-13
Switch Installation and Setup Using the Console
The following is an example of the initial configuration session:
SmartCell ZX Version 2.1 (c) Cabletron Inc.
password:: admin
< “admin” is the default password
The current user is Administrator
Could not find setup file
Running Setup Automatically
SwitchName() : My_ZX250
< a switch name
IPAddress(0.0.0.0) : 210.160.77.254
< an IP address
IPNetMask(255.0.0.0) : 255.255.255.0
< a subnet mask
Confirm(y/n)?:y
Changing IP Address on System. Telnet session (if any) will be lost.
SmartCell ZX #
Before continuing to chapter 3, “IP over ATM and LANE,” read the following sections for information about
U
Using the SmartCell X-250 console
U
Installing and getting started with the Windows-based SmartSwitch ATM Administrator application
2.6 USING THE CONSOLE
Use the ZX-250 console interface to configure and manage your switch. The following is a description of the console
interface and its operation.
2.6.1 Console Commands
2 p›F
For detailed descriptions of console commands, see the SmartCell 6A000/ZX-250
Reference Manual.
All console commands use the syntax:
operator switch-attribute [<parameter 1> <parameter 2>... <parameter n>]
Where the operator is one of the following:
show
(
display
): Show the current values used by a switch-attribute.
add
(
create
): Add a new instance of a switch-attribute.
delete
(
remove
): Delete an instance of a switch-attribute.
modify
(
set
): Change the values that currently define a switch-attribute.
start
: Start a process on the switch; for example, start the LAN Emulation Configuration Server.
restart
: Restart a process on the switch; for example, restart a client.
flush
: Remove assigned values; for example, flush a route table.
alias
: Create easier names for often-used commands and their parameters.